Loading The Bottom Rack - Bosch SHX98M09UC Manual De Uso

Figure 3
10 place setting bottom rack
Figure 4
12 place setting bottom rack
Figure 5
Figure 6
Do not block vent.
6

Loading the Bottom Rack

Place large items in the bottom rack. Load pots, pans and bowls upside-down. Figures 3
and 4 show typical mixed loads for the bottom rack.
Loading Extra Tall Items
If an item is too tall to be placed into the bottom rack even with the top rack in the raised
position, remove the empty top rack by pulling it out of the dishwasher until it stops
rolling. Pull the front of the rack upward and outward until the rollers are completely free
of the roller guides. Set the top rack aside. Push the roller guides back into the dishwasher.
Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler
clockwise to lock it into position as shown in Figure 5. Place your extra tall item(s) in the
bottom rack as shown in Figure 6.
NOTICE
To avoid dishwasher damage, do not load the dishwasher with objects such as
paper products, plastic bags, packing materials, or anything other than normal
dishware and kitchenware. Do not load the dishwasher with anything other than
dishwasher-safe dishware and kitchenware.
NOTE: Keep the vent on the tub's right side clear by placing tall items such as plastic
cutting boards and tall baking sheets on the bottom rack's left side, center, or back.
NOTICE
To avoid dishwasher damage, do not reinstall the top rack without removing the extra
tall item sprinkler. Do not reinstall the top rack with the sprinkler installed.
To remove the sprinkler and return the dishwasher to its normal condition:
1. Turn the sprinkler counterclockwise and remove it.
2. Retrieve the top rack.
3. Tilt the top rack upwards and position the top rack rollers onto the roller guides.
4. Continue pushing the top rack until the rollers are on the guide.