DeWalt DW890 Manual De Instrucciones página 6

DW890/384122 11/22/04 7:32 AM
FIG. 5
pressure gives you the smoothest cutting. It is important to keep the
lower surfaces of the side blades flat on the material being cut
(Figure 4). When cutting curves, do not tilt the tool; keep the side
blades flat and level. For best cutting efficiency, keep blades sharp.
Wear gloves when handling sheet metal. The edges are sharp and
can cause injury.
CAUTION: Do not use the shear with any kind of accessory or
attachment. Such usage might be hazardous.
Adjustment (Figure 5)
To adjust the curl of waste material, the left side knife has elongated
holes. Adjustment may be necessary after changing blades or
material being cut. Loosen cap screws and tap side knife either
forward or backward so that curl of waste does not hit shear housing
or work material while cutting.
Lubrication
All ball bearings are factory lubricated to last the life of the tool. All
sleeve and needle bearings receive their lubrication from grease in
the gear case. Clean and re-lubricate gear case yearly or whenever
servicing requires the gear case to be removed. Use type and
quantity of grease shown on the parts bulletin packed with your tool.
Page 4
ALTERNATELY
TIGHTEN TO SECURE
Accessories
Recommended accessories for use with your tool are available at
extra cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
4
WALT tools are covered by our:
E