Sony CMT-DX400 Manual De Instrucciones página 8

Note
• Keep the antennas away from the speaker cords.
3 Connect a TV.
Select one of the following connections.
Connection A
If your TV has component video input
jacks, connect your TV to the
COMPONENT VIDEO OUT jacks with a
component video cord (not supplied).
If your TV is compatible with progressive
format file (480P or 576P) signals, use this
connection and set the progressive setting
to "ON".
Connection B
Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cord (supplied).
When using a TV
Turn on the TV and select the video input so that you
can view the pictures from this system.
4 For models with a voltage selector, set
the VOLTAGE SELECTOR to the local
power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
GB
8
5 Connect the power cord to a wall
outlet.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
6 Press ?/1 to turn on the system.
"HELLO" appears on the front panel.
7 Set the color system to PAL or NTSC
depending on the color system of your
TV.
The color system is factory set to NTSC.
1
Turn on your TV and select the video
input.
2
Press ?/1 to turn on the system.
3
Press FUNCTION +/– repeatedly to
switch the function to DVD/CD.
Playback starts automatically if a disc with
auto playback function is loaded. Press x
twice to stop playback.
4
Press SETUP in stop mode.
etup Menu appears.
The S
5
Press < or , repeatedly to select
"Preference Page", then press
6
Press M or m repeatedly to select "TV
Type", then press
7
Press M or m repeatedly to select PAL/
Multi/NTSC from the displayed list,
then press .
8
Press SETUP to turn off the Setup
Menu.
Notes
• A disturbance on the TV screen may be present for a
moment after changing the color system as described
above.
• If you find the picture image may be distorted, you
can operate as below to default color system setting:
– Open the tray.
– Press DISPLAY.
– Press .
.
.