Sony CMT-DX400 Manual De Instrucciones página 27

You cannot perform some functions such as
Stop, Search, Slow-motion Play, Repeat Play,
Random Play.
• Depending on the disc, you may not be able to do
some of the operations above. Refer to the
operating instructions supplied with the disc.
DATA CD or DATA DVD takes a longer time to
start playback.
• After the system reads all the files on the disc,
playback may take more time than usual if:
– the number of folders or files on the disc is very
large.
– the folder and file organization structure is very
complex.
MP3 file cannot be played back.
• Recording was not performed according to the
UFD/ISO9660 Level 1 or Level 2 format, or Joliet
in the expansion format.
• The MP3 file does not have the extension ".MP3".
• The data is not stored in MP3 format.
• The disc contains more than 300 folders.
• The folder contains more than 648 MP3 files.
The JPEG file cannot be played.
• The data CD / data DVD is not recorded in JPEG
format that conforms to UFD/ISO9660 Level 1/
Level 2 or Joliet.
• The JPEG file does not have the extension ".JPG"
or ".JPEG".
• The data is not formatted in JPEG even though it
has the extension ".JPG" or ".JPEG".
• The disc contains more than 300 folders.
• The folder contains more than 648 JPEG files.
The DivX file cannot be played.
• The file is not created in DivX format.
• The file has an extension other than ".AVI",
".DIVX" or ".DIV".
• The DATA CD (DivX file)/DATA DVD is not
created in a DivX format that conforms to
ISO9660 Level 1/Level 2 or, Joliet/UDF.
• The DivX file is larger than 640 (width) × 480
(height).
The sound loses stereo effect when you play a
VIDEO CD or CD.
• Press AUDIO repeatedly during play to select
"Stereo" (see "Changing the sound (page 16)").
• Make sure the system is connected appropriately.
The JPEG image file can not be played.
• It is larger than 3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000 pixels in
Progressive JPEG image file which is mainly used
on the internet WEB site.
When USB is not detected.
• Turn off the system and remove the USB device
from the (USB) port. Make sure there is no
problem with the USB device.
Picture
There is no picture.
• Press N.
• Check that the system is connected securely.
• The video cord is damaged. Replace it with a new
one.
• Make sure you connect the system to the video
input jack of your TV (page 8).
• Make sure you turn on the TV and operate the TV
correctly.
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
• When you play a disc, make sure you set the color
system correctly, according to your TV (color)
system.
• Make sure you connect the system and your TV
using the video cord (supplied) so that you can
view the pictures.
• When connecting your TV and the VIDEO OUT
jack of this system using the video cord
(supplied), set the system to interlace format.
• You have set progressive format but your TV
cannot accept the signal in progressive format.
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace format (default
setting).
Picture noise appears.
• Clean the disc.
• When you play a disc, the color system is
different. Set the color system to match your TV
(page 8).
The aspect ratio of the screen cannot be
changed even though you set "TV Display"
under "General Setup Page" in the Setup
Menu when you play a wide picture.
• The aspect ratio is fixed on your DVD.
• Depending on the TV, you may not change the
aspect ratio.
Messages do not appear on the screen in the
language you want.
• Select the language you want for the on-screen
display in "OSD Lang" under "General Setup
Page" in the Setup Menu (page 19).
continued
GB
27