Installation Instructions; Grounding The Ice Machine; Before You Begin; Location And Preparation - GE UCC15 Manual Del Propietario E Instalación

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca

GROUNDING THE ICE MACHINE

WARNING
Failure to follow these instructions can result in
death, fire, or electrical shock.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE THIRD (GROUND) PRONG FROM THE
POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE ICE
MACHINE TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT
•
ordinances. Save these instructions for local inspector's use.
• Note to Installer – Be sure to leave these instructions with
the Consumer.
• Note to Consumer – Keep these instructions for future
reference.
• Skill level – Installation of this appliance requires basic
mechanical skills.
• Completion time – Installation can vary
Water Line Installation 30 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warranty.
8
Electrical Shock Hazard.
Observe all governing codes and
Ice Machine
ICE MACHINE LOCATION AND
PREPARATION
This ice machine is designed to be used indoors, in a
controlled environment or outdoors within certain limits.
It is made up of two major systems: the ice making
system and the ice storage system. The ice making
system is a continuous flow that makes ice when the ice
level becomes low and stops when it is full.
IMPORTANT: Never keep anything in the ice storage bin
that is not ice. Objects like wine or beer bottles are not
only unsanitary, but the labels can slip off and plug up the
drain.
IMPORTANT: Never allow the machine to operate without
regular cleaning. The machine will last longer if it is kept
clean. Regular cleaning should happen at least once per
year, and preferably twice. Some water conditions will
dictate even more frequent cleaning of the ice making
section, and some carpets or pets will dictate more
frequent cleaning of the condenser
Specifications
The ice machine will operate adequately within the limits,
but functions best in temperatures between 70°F and
80°F.
• Minimum air temperature: 50°F (10°C)
• Maximum air temperature: 100°F (38°C)
• Minimum water temperature: 40°F (4.5°C)
• Maximum water temperature: 100°F. (38°C)
• Minimum water pressure: 20 psi (1.4 bar)
• Maximum water pressure: 80 psi (5.5 bar)
Electrical voltage limits:
• Minimum - 104 volts
• Maximum - 126 volts