BKS4 wet&dry 12/11 (Innenteil)
en
Fold out the picture pages.
Before using for the first time
Fitting the charger
The charger can be wall-mounted or used as a table-top
cradle.
1
Figure
First connect the charger plug to the charger holder
and secure by turning.
If using as a table-top cradle, guide the cable through
the recess in the charger.
2
Figure
When mounting on the wall, select a location close to
a socket and mount the charger on the wall using the
screws provided
3
Figure
Insert the cordless vacuum cleaner into the charger
as shown.
!
Make sure that the contacts of the cordless vacuum
cleaner and charger plug are not dirty. Clean the
contacts if necessary.
!
Before using the appliance for the first time, the
cordless vacuum cleaner batteries must be charged
for at least 16 hours.
4
Figure
Plug the charger plug into the socket.
The charging indicator lights up.
The indicator remains lit for as long as the vacuum
cleaner is connected to the mains via the charger.
It does not go out even when the vacuum cleaner
batteries are fully charged.
It is normal for the charger and vacuum cleaner to
become hot and not a cause for concern.
You can charge the cordless vacuum cleaner at any
time when it is not in use. In this way, it is always
ready for use.
8
21.12.2011
15:39 Uhr
Vacuuming
5
Figure
Remove the appliance from the charger and move the
on/off button in the direction of the arrow.
Crevice nozzle
6
Figure
For vacuuming crevices and corners, etc.
Insert the crevice nozzle into the air intake opening
of the cordless vacuum cleaner, as illustrated.
Hard furnishings brush
7
Figure
For vacuuming picture frames, books, furniture
requiring particular care, etc.
Fit the hard furnishings brush onto the crevice nozzle
as shown.
Vacuuming liquids
!
Empty the dirt container and clean the filter before
vacuuming up liquids (see Cleaning the filter).
8
Figure
Insert the liquid nozzle into the air intake opening of
the cordless vacuum cleaner, as illustrated.
Vacuum up liquids in the direction of the arrow.
!
Caution: Liquids must only be vacuumed up to the
MAX. mark -> the appliance may be damaged by
overfilling
Empty the dirt container immediately after
vacuuming up liquids.
9
Figure
After vacuuming, return the appliance to the charger.
Seite 8