Hot Water/Rinse - Cuisinart SS-10 Manual De Instrucciones

Ocultar thumbs Ver también para SS-10:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Hot Water/Rinse

Your coffeemaker is equipped to dispense
hot water to make hot chocolate, tea, soup,
and more. Your coffeemaker is also equipped
with a Rinse cycle to flush out residual
flavors. The Rinse cycle will dispense about
4 oz. of hot water.
Note: We suggest running the Rinse cycle
before using hot water to flush out any
residual coffee, tea or hot cocoa flavor.
To Rinse:
1. Place a cup or mug on the drip tray.
2. Lift the handle. Check to make sure
there is no capsule inserted.
3. Lower the handle to close the brewing
chamber. When closed completely, the
control panel will indicated READY.
4. Press Rinse. During the Rinse cycle,
only the Rinse button will be lit.
The control panel will display the
word RINSE (see figure 9).
The RINSE and HOT WATER buttons will
remain lit for one minute. While buttons
are lit, you can perform another Rinse
cycle or dispense Hot Water without
opening the brew chamber. All brew-
size icons will be displayed.
Note: To BREW directly after a Rinse
cycle, open the brewing head, insert a
capsule and brew as normal.
figure 9
To make Hot Water:
1. Place a cup or mug on the drip tray.
2. Lift the handle. Check to make sure
there is no capsule inserted.
3. Lower the handle to close the brewing
chamber. When closed completely, the
control panel will indicated READY.
4. All brew-size icons will be displayed with
your default size shown as a solid mug.
To choose a different size, use the
buttons.
5. Press Hot Water. While the Hot Water
cycle is in progress, only the Hot Water
button will be lit. The control panel
will display the words HOT WATER,
as well as the serving size you selected
(see figure 10).
Following the cycle, you can perform
another Rinse or another Hot Water
cycle immediately for up to one minute.
The RINSE, HOT WATER, MENU and
and
buttons will be lit. After this time
the unit will return to Idle mode and
OPEN HEAD
will be displayed.
Note: To BREW directly after a Hot
Water cycle, open the brewing head,
insert a capsule and brew as normal.
11
figure 10
or

Capítulos

Tabla de contenido
loading

Tabla de contenido