Technical Data - Metz mecablitz 44AF-2 digital Manual De Instrucciones

The shots have shadows in the bottom of the image.
• Because of parallax error between lens and flash
unit, close-up shots may not, depending on the
focal length at the bottom of the image, be fully illu-
minated. Turn the wide-angle diffuser in front of the
reflector.
The shots are too dark.
• The subject is beyond the range of the flash unit.
Note: Using bounce flash reduces the range of the
flash unit.
• The subject contains very bright or highly reflective
areas. The metering system of the camera or flash
unit is deceived as a result.
Set a positive manual flash exposure correction,
e.g., +1 EV.
The shots are too bright.
• When taking close-ups, make sure to preserve spe-
cific minimum illumination ranges to avoid overex-
posure. The minimum distance from the subject
should represent at least 10% of the maximum ran-
ge.

15 Technical data

Max. guide numbers at ISO 100/21°,
zoom 105 mm:
In the metric system:
In the imperial system:
Flash modes:
- Canon:
E-TTL, E-TTL II, Manuel M, Remote slave mode, HSS.
- Nikon:
i-TTL, i-TTL-BL, Manuel M, Remote slave mode, FP.
Olympus:
TTL, Manuel M, Remote slave mode, FP.
- Pentax:
P-TTL, Manuel M, Remote slave mode, P-TTL-HSS.
- Samsung:
A-TTL, Manuel M
- Sony:
Preflash TTL, ADI metering, Manuel M, remote slave
mode, HSS.
- Fujifilm:
TTL, Manuell M.
Manual partial light output levels:
P1/1; P1/2; P1/8; P1/32
Flash durations see table 2, (page 197):
44
144
125
k