Wide-Angle Diffuser; Mecabounce 52-90 - Metz mecablitz 44AF-2 digital Manual De Instrucciones

The LED button of the mode set flashes
as a warning if the shot cannot be com-
pletely illuminated. In such a scenario,
use the wide-angle diffuser

6.1 Wide-angle diffuser

With the integrated wide-angle diffuser
, focal lengths from 12mm can be
exposed (135 format).
Flip the wide-angle diffuser
the main reflector as far as it goes and
let go.
It will fold down automatically.
The main reflector will be guided to the
required position automatically.
Automatic adjustment of the motor
zoom main reflector cannot occur when
the wide-angle diffuser is in use.
To set the wide-angle diffuser
flip it up and slide it in completely.
+
.
out of
+
to 90°

6.2 Mecabounce 52-90

The Mecabounce (special accessory;
see 16) can be attached to the front of
the motor zoom main reflector.
The motor zoom main reflector will then
only automatically adjust the focal
length set for the camera lens if:-
- a digital data exchange occurs bet-
ween the flash unit and the camera,
e.g. by pressing the shutter release.
- the motor zoom main reflector stays in
the default position (°0).
The motor zoom main reflector will not
automatically adjust the focal length
set for the camera lens:
- if the integrated wide angle lens is
rotated in front of the reflector.
- if the mecabounce MBM-02 (special
accessory) is mounted onto the motor
zoom main reflector.
When the head is rotated vertically or
horizontally, the motor zoom main
reflector moves into an optimal positi-
on for indirect flash and stays in this
position, independent of the focal
length set for the camera lens.
+
k
115