Spare Parts; Technical Information; Installing Accessories; Ec Declaration Of Conformity - THERMOBILE GA 24 Manual Del Usuario

ENGLISH
7

SPARE PARTS

Contact the dealer for the use of spare parts.
8

TECHNICAL INFORMATION

• For technical specifications, see table B
in the annex at the back of this manual.
9

INSTALLING ACCESSORIES

9.1 Outside air suction set (fig. 12)
When a hose with a wall feed-through is
used, the combustion air can enter directly
from outside.
1. Make a hole in the wall to place the wall
feed-through (A).
2. Slide one end of the hose (B) onto the
inlet of the heater (C).
The air hose may have a maximum
length of 6 m.
3. Slide the other end onto the connection
of the wall feed-through (D).
4. Fix the hose at both ends with hose
clamps.
9.2 Connection diameter of air hose
The connection to the heater has a diameter
of 100 mm.
10 EC DECLARATION OF
CONFORMITY
For the EC declaration of conformity, go to
www.thermobile.nl.
GA 24-42-60-85-110 GA 42-60-85-110 40.020.947 - rev. 04 - 2011
40.020.947 - rev 05 - 2016
English
25 25