Service - Stihl RMI 632 PC-L Manual De Instrucciones

English
Start signal
The acoustic signal when the mowing blade is
activated.
Alarm signal
The acoustic signal when the robotic mower hits an
obstacle.
Menu signal
The acoustic indicator when you open a menu and
confirm a selection by pressing the OK button.
Child lock
If the impact sensor is triggered several times in succession
within a short time, the robotic mower and the mowing blade
will stop.
If the impact sensor is not triggered again, the robotic mower
will continue automatic mowing after a few seconds.
Keylock
When the keylock is activated, the control panel is
locked. The operator must press and hold the Back
button and then press the forward navigation button
on the navigation pad to unlock the control panel /
manual controller. The keylock will lock the control
panel again 2 minutes after the last button is pressed.
Link iMow and dock:
The mower and docking station must be linked if you
replace the docking station the robotic mower.
► Install the docking station and connect the perimeter wire,
@ 10.3 and @ 10.5.
60
► Lift the robotic mower slightly by the carrying handle (1)
and relieve the weight on the drive wheels. Push the
machine, resting on its front wheels, into the docking
station.
► After pressing the OK button, enter the PIN code.
The robotic mower will then search for the wire signal and
automatically save it for automatic operation. This process
may take several minutes, @ 10.6.

15.5 Service

Blade change
► After mounting a new mowing blade, confirm the
replacement of the mowing blade by pressing the OK
button.
Find wire break
► Activate the assistant to find a wire break by pressing the
OK button.
► Find the wire break, @ 22.3.
Reset settings
► Press the OK button and enter the PIN code.
The robotic mower will be reset to factory defaults and the
installation assistant will be started, @ 10.
15 Settings
1
0478-131-3052-A