Yamaha RX-V663 Manual De Instrucciones página 85

Start pairing START PAIRING
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-10, sold separately) with
your Bluetooth component. For details about the pairing,
refer to "Pairing the Bluetooth™ adapter and your
Bluetooth component" on page 59.
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
Press 8 ENTER to start pairing.
1
The connected Bluetooth adapter starts searching
Bluetooth components. "Searching..." appears in the
video monitor.
2
Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
"YBA-10 YAMAHA" (example) appears in the
Bluetooth device list.
3
Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
"0000" on the Bluetooth component.
Once this unit completes the pairing successfully,
"Pairing completed" appears.
y
To cancel the pairing, press 9 RETURN to exit from
"START PAIRING".
Press 9 RETURN to exit from "START
4
PAIRING".
Notes
• If the connected Bluetooth adapter cannot find any Bluetooth
components, "Not found" appears.
• If a Bluetooth adapter is not connected to this unit, "No
Bluetooth Adapter" appears.
Multi-channel input BGV BGV
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
L)MULTI CH
INPUT RENAME
VOL. TRIM;;;;;0.0dB
.
BGV;;;;;;;;;;;;LAST
INPUT CH;;;;;;;;6CH
[ ]/[ ]:
[ENTER]:
Up/Down
Select
Customizing this unit (MANUAL SETUP)
Choice
LAST Automatically selects the last selected video
source as the background video source.
DVD, DTV/ Selects the corresponding input source as the
background video source.
CBL, DVR,
VCR, V-AUX
OFF Does not play the video source in the
background.
Input channels INPUT CH
Use this setting to select the number of channels input
from an external decoder (see page 25).
Choices: 6CH, 8CH
L)MULTI CH
INPUT RENAME
VOL. TRIM;;;;;0.0dB
BGV;;;;;;;;;;;;LAST
. INPUT CH;;;;;;;;6CH
[ ]/[ ]:
[ENTER]:
If the connected component outputs discrete
6-channel audio signals.
Select "6CH".
If the connected component outputs discrete
8-channel audio signals.
Select "8CH". Also set "FRONT" (see below) to the
analog audio jacks at which the front left and right
channel signals output from the connected component
are input.
Front left and right channels input jack FRONT
If you selected "8CH" in "INPUT CH", you can select the
analog audio jacks at which the front left and right channel
signals output from the connected external decoder is
input.
Choices: CD, MD/CD-R, DVD, DTV/CBL, DVR, VCR,
V-AUX
L) MULTI CH
INPUT RENAME
VOL. TRIM;;;;;0.0dB
BGV;;;;;;;;;;;;LAST
INPUT CH;;;;;;;;8CH
.
FRONT;;;;;;;;;;;DVD
[ ]/[ ]:
[ENTER]:
Note
"FRONT" parameter appears only when you set "INPUT CH" to
"8CH".
Functions
Up/Down
Select
Up/Down
Select
83
En