Symbols On The Product; Safety Definitions; Safety; General Power Tool Safety Warnings - Husqvarna BCA850 Manual De Usuario

Symbols on the product

WARNING! Careless or incorrect use of this
attachment can result in serious or fatal
injury to the operator or others.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
/min
Keep all parts of your body away from the
hot surfaces.
The product can cause objects to eject,
which cause injury.
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m / 50 ft.
distance to persons and animals during
operation of the product.
Use approved protective gloves.

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
1340 - 001 - 20.12.2019
Use heavy-duty slip-resistant boots.
The operator must ensure that no people or
animals come closer than 15 metres. When
several operators are working at the same
site a safety distance of at least 15 metres
must be in effect. The attachment can
forcibly throw objects that can bounce back.
This can result in serious eye injuries if the
recommended safety equipment is not used.
Noise emission to the environment
according to the European Community's
Directive. The attachment's emission is
specified in the Technical data chapter and
on the label.
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500

Safety

General power tool safety warnings

WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Note: Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Other general safety information
• Deactivate the product before you move to another
area. Always remove the battery when passing the
product to another person.
The rating plate shows the serial
number. yyyy is the production year,
ww is the production week and xxxx
is the sequential number.
3