Moving The Top Heating Element (Some Models Only); Replacing The Oven Lamp - Whirlpool AKP 738 Manual De Instrucciones

Moving the top heating element
(some models only)
1. Remove the side accessory holder grilles
(Fig. 3).
2. Pull the heating element out a little
(Fig. 4) and lower it (Fig. 5).
3. To reposition the heating element, lift it
up, pulling it slightly towards you, be sure
it comes to rest on the lateral supports.
Fig. 3
Fig. 4
Fig. 5

Replacing the oven lamp

To replace the rear lamp (if present):
1. Disconnect the oven from the power
supply.
2. Unscrew the lamp cover (Fig. 6), replace
the lamp (see Note for lamp type) and
screw the lamp cover back on (Fig. 7).
3. Reconnect the oven to the power
supply.
Fig. 6
Fig. 7
Note:
• Use 25-40 W lamps only.
• Do not use the oven until the lamp cover
has been repositioned.
48