Connections/Editing; Connections To A Tv Or Vcr; Dubbing To A Vcr - JVC GR-D850U Manual De Instrucciones

40

Connections/Editing

EN

Connections To A TV Or VCR

To AV connector
Audio/Video cable
(provided)
1
TV
1 Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
2 Red to AUDIO R IN*
3 White to AUDIO L IN*
* Not required for watching still images only.
1
Make sure all units are turned off.
2 2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step
If not, go to step
3 3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4 4
Turn on the camcorder, the VCR and the
TV.
5 5
Set the VCR to its AUX input mode, and
set the TV to its VIDEO mode.
6 6
Start playback on the camcorder (
• Please set "WIDE TV" of Playback Menus
so that the image may suit your TV (16:9
TV or 4:3 TV) (
or
2 3
VCR
3 3
.
4 4
.
21).
28, 31).
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set "DATE/TIME" to "ON", "AUTO" or "OFF"
( 31).
• Time Code
Set "TIME CODE" to "ON" or "OFF" (
• On Screen
Set "ON SCREEN" to "OFF", "LCD" or
"LCD/TV" ( 31).
Notes:
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack. ( 16)
• To monitor the picture and sound from
the camcorder without inserting a tape or
memory card, set the camcorder's
Power Switch to "REC", then set your TV to the
appropriate input mode.
• Make sure you adjust the TV sound volume to
its minimum level to avoid a sudden burst of
sound when the camcorder is turned on.

Dubbing To A VCR

To use this camcorder as a player
1 1
Following the illustration,
"Connections To A TV Or VCR", connect
the camcorder and the VCR's input
connectors.
2 2
1
Perform steps –
TV Or VCR". ( 40)
3 3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4 4
To stop dubbing, stop recording on
the VCR, then stop playback on the
camcorder.
31).
40,
6 6
, "Connections To A