Husqvarna Connect; To Set The Product In Operation Position; Operation; To Set The Cutting Height - Husqvarna LE121P Manual Del Usuario

Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.

Husqvarna Connect

Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product:
• Extended product information.
• Information about, and help with, product parts and
servicing.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect
app to connect and register the product.

To set the product in operation position

If the handle is folded to its transport position (see
set the product in transport position on page 19 ), follow
this procedure to make sure the handle goes back its
operation position.
1. Lift the handlebar.
12

Operation

2. Tighten the upper knobs.
3. Move the knobs up in the direction of the handle until
they stop and you hear a click.
To
4. Tighten the knobs fully.

To set the cutting height

The cutting height can be adjusted in 7 levels.
1. Move the cutting height lever out and reward to
increase the cutting height.
2. Move the cutting height lever out and forward to
decrease the cutting height.
CLICK!
428 - 002 -