Specifications
Tips For Better Performance
•
When opening or closing the turntable cover, handle it gently,
moving it either at the center or equally from both sides.
•
Do not touch the stylus tip with your fingers; avoid bumping
the stylus on the turntable mat or a record's edge.
•
Clean the stylus tip frequently, using a soft brush with a
back-to-front motion only.
•
If you use a stylus cleaning fluid, use it very sparingly.
•
Wipe the dust cover and turntable housing gently with a soft
cloth. Use only a small amount of mild detergent solution to
clean the turntable and dust cover.
•
Never apply harsh chemicals or solvents to any part of the
turntable system.
•
Prior to moving the turntable, always unplug it from the AC
outlet and fasten the tone arm on the tone arm rest with the
vinyl twist-tie.
Specifications
Communication system
Output
Maximum communication range
Frequency band
Compatible Bluetooth profile
Support codec
Type
Platter
Motor
Speeds
Wow and flutter
Signal-to-noise ratio
Cartridge
Output level
Pre-amplifier "PHONO"
Pre-amplifier "LINE"
Phono pre-amplifier gain
Power
Dimensions
Net weight
Accessories
Replacement stylus
•
The
Bluetooth
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license.
All other trademarks are property of their respective owners.
•
For product improvement, the product is subject to modification without notice.
8
Bluetooth
Ver. 3.0
Bluetooth
Specification Power Class 2
1.8 mW EIRP
Line of sight - approx. 10 m
2.402 GHz to 2.480 GHz
A2DP
SBC
Belt drive turntable, fully automatic
Aluminum
DC servo-controlled
33
/
RPM, 45 RPM
1
3
Less than 0.25% (WTD) @ 3 kHz (JIS)
>50 dB (DIN-B)
Integral Dual Moving Magnet
stereo cartridge with diamond stylus
™
2.5 mV nominal at 1 kHz, 5 cm/sec
150 mV nominal at 1 kHz, 5 cm/sec
36 dB nominal, RIAA equalized
220 to 240V AC, 50/60 Hz, 3W (Europe)
360 mm (14.17") W x 97 mm (3.82") H x 356 mm (14.02") D
3 kg (6.6 lbs.)
3.5 mm (1/8") mini-plug (male) to dual RCA (male) stereo output cable, 45 RPM adapter, Removable hinged
dust cover
ATN3600L