KNOW YOURSAW
READ THIS INSTRUCTION
MANUAL
AND SAFETY
RULES
BEFORE
OPERATING
YOUR
CHAIN
SAW. Compare
the illustrations
with your unit to familiarize
yourself
with the location
of
the various
controls
and adjustments.
Save this manual for future reference.
Front Handle
Bar Tool
X_
Starter Rope
--
Front Hand Guard
_1
¢-r._
"
//_
Choke
Knob
,
Ow. & oP
Chain _
P
.
Bar Oil
/
Fill Cap
Starter Housing
Fuel Mix Fill Cap
Cylinder
Cover
\
Fast Idle
Throttle
Lockout
\
Rear
Handle
,\
\
Throttle
Trigger
Chain Brake
Chain Brake Nuts
Guide Bar
)irection
of Chain
Travel
ON/STOP
SWITCH
The ON/STOP
SWITCH
is used to stop the
engine.
THROTTLE
TRIGGER
The THROTTLE
TRIGGER
controls engine
speed.
THROTTLE
LOCK-OUT
The
THROTTLE
LOCK-OUT
must
be
pressed
before you can squeeze
the throttle
trigger. This feature
prevents you from acci-
dentally
squeezing
the trigger.
FAST
IDLE
LOCK
The FAST IDLE LOCK holds the throttle trig-
ger in the starting
position.
Activate
the fast
idle lock by pressing
the throttle lock-out
and
squeezing
the
throttle
trigger.
With
the
throttle trigger squeezed,
press the fast idle
lock.
Release
the throttle lock-out
and trig-
ger while holding the fast idle lock button.
CHOKE
KNOB
The CHOKE
KNOB activates
the choke to
provide
additional
fuel to the engine
during
cold starting.
CHAIN
BRAKE
The CHAIN
BRAKE is a device
designed
to
stop the chain if kickback
occurs.
The chain
brake activates
automatically
in the event of
kickback.
The chain brake activates
manu-
ally if the front hand guard is pushed forward.
The chain brake is disengaged
by pulling the
front hand guard back toward the front han-
dle as far as possible.
CHAIN
TENSION
it is normal for a new chain to stretch during first
30 minutes
of operation.
You should
check
your
chain
tension
frequently.
See CHAIN
TENSION
under the ASSEMBLY
section.
,_ WARNING:
Muffler is very hot during
and after use. Do not touch the muffler or ab
low combustible
material
such as dry grass
or fuel to do so.