Introduction; Specific Safety Rules; Features; Unpacking - Urrea BT900 Manual De Usuario Y Garantía

INTRODUCTION

Your PORTABLE WORKBENCH has many fea-
tures that will make your job faster and easier.
Safety, performance and reliability have been
given top priority in the design of this tool,
qualities to make easy to maintain and to op-
erate.
WARNING: Carefully read the entire man-
ual before attempting to use this tool. Be sure
to pay special attention to the safety rules and
all the Warnings and Cautions of this manual.

SPECIFIC SAFETY RULES

WARNING: Read and understand all instruc-
tions. Failure to follow all indications listed be-
low, may result serious personal injury.
SAVE THESE INSTRUCTIONS.
• Keep your work area clean and well lit. Clut-
tered benches and dark areas may cause acci-
dents.
• KNOW YOUR PRODUCT. Read the operator's
manual for this product and for any tool being
used with this work station.
• Make sure all moving parts are free from in-
terference.
• Keep hands free of all moving parts to avoid
pinching and other injuries.
• Place the work station on a firm, level sur-
face where there is plenty of room to handle
and properly support the workpiece.
• Make sure workpieces are properly sup-
ported.
• Never perform work on the work station out-
side the width of the front legs. Doing so may
cause the work station to become unbalanced
and tip.
• Check that all screws and knobs are tight and
legs are securely locked before operating this
product.
• Do not use as a stepladder, standing plat-
form, or scaffolding support.
• Stop immediately if the workpiece or work
station moves when operating.
• Save these instructions. Refer to them fre-
quently and use them to instruct other users. If
you loan someone this product, also loan these
instructions.
8

FEATURES

UNLOCK
LOCK
9
3
4
5
6
7
1. SLIDING CLAMP.
2. FIXED CLAMP.
3. LOCK/UNLOCK LATCH.
4. LEGS LOCK KNOBS.
5. FOOT PEDAL RELEASE.
6. FOOT PEDAL.
7. FRONT LEGS.
8. REAR LEG.
9. ARM TRANSPORT LOCK.

UNPACKING

• Carefully remove the product from the car-
ton and place on a level work surface.
• Cut tie-wraps before operating.
WARNING: Do not use this product if it is not
completely assembled or if any parts appear
to be missing or damaged. Use of a product
that is not properly and completely assembled
could result in serious personal injury.
• Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
• Do not discard the packing material until you
have carefully inspected and satisfactorily op-
erated the product.
1
2
4
8
4
7