Cancelling An Overdub; (Undo/Redo/Track Clear); Auto Recording/Count-In Recording Functions - Boss LOOP STATION RC-30 DUAL TRACK LOOPER Manual Del Usuario

Display Play Stop
Stop
One-shot
oS
imme-
playback
diately
Fade-
Loop out and
Fo
play then
stop
Play to
the end
of the
Loop
LE phrase
play
and
then
stop
3. Press the [SELECT] button to return to
normal operation.
The stop mode setting is remembered when you save
the phrase (p. 10).

Cancelling an Overdub

(Undo/Redo/Track Clear)

You can Undo/Redo by holding down the left pedal for two
seconds or longer. You can clear the track by holding down
the right pedal and pressing the left pedal.
Operation Display Explanation
Hold down the left pedal for at least
two seconds during playback or
Undo Un overdubbing; the recording or the
most recent overdubbing will be
cancelled.
If you want to restore the cancelled
sound, hold down the left pedal for
at least two seconds while playback
Redo rE
once again.
* Redo is only available for
overdubbing.
Explanation
One-shot playback will play
the phrase once from the
beginning to the end, and
then stop automatically.
* Overdubbing is disabled
when one-shot playback
is in effect. If the left pedal
is pressed during playback
of the phrase, the phrase
starts playing from the
beginning again (retrigger
playback).
The stop effect will be applied
when you press the right
pedal.
• The PLAY indicator will blink
until the phrase stops.
• You can stop immediately
by pressing the right pedal
once again before the
phrase has stopped.
* You can't overdub before
the phrase has stopped.
Operation Display Explanation
If you hold down the right pedal and
press the left pedal while both tracks
1 and 2 are stopped, the phrase of the
current track will be cleared. (Clear is
Track
CL
temporary; phrases saved in phrase
clear
memory will not be deleted.)
* Make sure to press the right pedal
first, then press the left pedal.
During Undo/Redo, the PLAY and REC indicators will blink
rapidly. During Clear, the PLAY indicator will blink rapidly.
Auto Recording/Count-In
Recording Functions
"Auto recording" starts recording the moment you begin
playing your guitar or play back your audio player. "Count-in"
sounds the rhythm for one measure before recording starts.
1. Hold down the [TAP TEMPO] button for
at least two seconds.
The display will indicate "
2. Use the [ ] / [ ] buttons to select the
desired recording mode, and then press
the left pedal to start recording.
Display Mode Explanation
Normal Recording will begin the instant you
no
recording press the left pedal.
The REC indicator will blink rapidly,
and the RC-30 will enter recording-
Auto
AU standby mode. When you begin
recording
playing, the REC indicator will light
and recording will start.
The [RHYTHM ON/OFF] button will
blink. When you press the left pedal,
the REC indicator will blink rapidly,
and the rhythm will sound for one
measure. (You can stop by pressing
the right pedal during this time.)
Count-in
Ct
When the one measure of playback
recording
has ended, recording will start. (The
rhythm will continue sounding even
after recording has begun.)
For more about the rhythm settings,
refer to "About Rhythm" (p. 12).
The recording mode will be reset to Normal recording when
you turn off the power.
Basic Operation
. "
no
11