General Power Tool Safety Warnings; Screwdriver Safety Warnings; Functional Description - Makita FS2700 Manual De Instrucciones

Ocultar thumbs Ver también para FS2700:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
ENGLISH (Original instructions)
1.
Locator
2.
Front cap
3.
Switch trigger
4.
Lock button
SPECIFICATIONS
Capacities
No load speed (min
Overall length
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
SCREWDRIVER SAFETY
WARNINGS
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
fastener may contact hidden wiring or its own
cord. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
4
Explanation of general view
5.
Lamp
6.
Reversing switch lever
7.
Adjusting ring
8.
Pointer
Model
Self drilling screw
Machine screw
Wood screw
-1
)
Net weight
Safety class
FS2700
301 mm
2. Always be sure you have a firm footing.
ENE033-1
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
ENF002-2
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
6. Always secure workpiece in a vise or similar hold-
down device.
SAVE THESE INSTRUCTIONS.
GEA010-2
WARNING: DO NOT let comfort or familiarity with
product (gained from repeated use) replace strict
adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Depth adjustment
For Model FS2700 only (Fig. 1)
GEB135-1
When you wish to drive self drilling screws, etc., adjust the
depth as follows. Turn the locator to adjust the depth.
Adjust the locator to create a distance of approximately
1 mm from the tip of the front cap (which works in
conjunction with the locator) to the base of the screw
head. One full turn of the locator equals 1 mm change in
depth. (Fig. 2 & 3)
9.
Hook
10. Bit
11. Sleeve
6 mm
8 mm
6.2 mm
0 - 2,500
1.8 kg
/II
FS2701
283 mm
1.7 kg
Tabla de contenido
loading

Este manual también es adecuado para:

Fs2701

Tabla de contenido