Rotary Hammer Safety Warnings - Makita HR2432 Manual De Instrucciones

ENGLISH
1 Switch trigger
2 Lock button
3 Reversing switch lever
4 Rotation with hammering
5 Action mode changing knob
6 Rotation only
7 Hammering only
8 Tighten
9 Loosen
10 Side grip (auxiliary handle)
11 Bit shank
SPECIFICATIONS
Capacities
Dust extraction capacities
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work. It
is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety instructions.
6
Explanation of general view
12 Bit grease
13 Bit
14 Chuck cover
15 Depth gauge
16 Dust cup
17 Clamping screw
18 Coupling hole
19 Coupling rod
20 Hose
21 Hose port
22 Dust exhaust port
Model
Concrete
Max. drilling depth
(Adjusting depth)
Max. bit diameter
Max. bit length
Dust bag capacity
–1
No load speed (min )
Blows per minute
Overall length
Net weight
Safety class
23 Frame
24 Stopper
25 Drilling depth
26 Complete contact with the
27 Fastener
28 Cap
29 Dust exhaust
30 Blow-out bulb
31 Chuck adapter
32 Keyless drill chuck
Tungsten-carbide tipped bit
Core bit
Diamond core bit
Steel
Wood

ROTARY HAMMER SAFETY WARNINGS

1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
4. Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5. Be sure the bit is secured in place before opera-
tion.
surface
HR2432
24 mm
54 mm
65 mm
13 mm
32 mm
100 mm
(0 – 100 mm)
25 mm
270 mm
3.7 L
0 – 1,000
0 – 4,500
407 mm
3.2 kg
/II
GEB007-7