Intended Use - Makita DTW1001 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
Square drive
Drive shank
No load speed
Impacts per minute
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.

Intended use

The tool is intended for fastening bolts and nuts.
Model DTW800 / DTW800XV: The tool is also intended
for drilling into wood.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DTW1001
Sound pressure level (L
Sound power level (L ) : 109 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DTW1002
Sound pressure level (L
Sound power level (L ) : 108 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DTW800
Sound pressure level (L
Sound power level (L ) : 106 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Standard bolt
High tensile bolt
Hard impact mode
Medium impact mode
Soft impact mode
Hard impact mode
Medium impact mode
Soft impact mode
) : 98 dB(A)
pA
) : 97 dB(A)
pA
) : 95 dB(A)
pA
DTW1001 /
DTW1001XV
M12 - M30
M10 - M24
19 mm
–
3.4 - 3.7 kg
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model DTW1001
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Model DTW1002
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTW800
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.0 m/s
4 ENGLISH
DTW1002 / DTW800 /
DTW1002XV DTW800XV
M12 - M24
M10 - M22
12.7 mm
11.1 mm Hex.
-1
0 - 1,800 min
-1
0 - 1,000 min
-1
0 - 900 min
-1
0 - 2,200 min
-1
0 - 2,000 min
-1
0 - 1,800 min
229 mm
D.C. 18 V
3.3 - 3.6 kg 3.4 - 3.7 kg
2
) : 15.5 m/s
h
2
2
) : 18.0 m/s
h
2
2
) : 24.0 m/s
h
2
–