Electromagnetic Fields (Emf); Safety Features; Safety Switch; Overheat Protection - Philips HR1378/00 Manual Del Usuario

2.1 Electromagnetic fields
(EMF)
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.

2.2 Safety features

2.2.1 Safety switch

The appliance is equipped with a built-in safety
system. The appliance only functions if you slide
the safety switch downwards and hold it in this
position while you press the on/off button. Release
the safety switch when the appliance starts
to operate. As soon as you release the on/off
button, the safety switch automatically resets to
its off position to protect against unintentional
operation of the appliance. If the safety switch
does not work properly, the charging lights flash
red.

2.2.2 Overheat protection

The appliance is equipped with a built-in overheat
protection. If you process a heavy load, the motor
unit may become hot. If this happens, the built-in
safety system switches off the appliance and all
charging lights light up red for 16 seconds. Let the
appliance cool down before you continue to use
it.
3 Your hand blender
A Motor unit
1 On/off button
2 Safety switch
3 Charging lights
4 Release buttons
B Charger
5 Upper part of charger
6 Adapter
7 Lower part of charger
C Accessories
4
8 Blender bar
9 Chopper coupling unit
10 Chopper blade unit
11 Serrated chopper blade unit for crushing
ice
12 Chopper bowl
13 Beaker
14 Beaker lid

4 Getting started

4.1 Preparing your hand
blender
Thoroughly clean the parts that come
1
into contact with food before you use the
appliance for the first time (see chapter
'Cleaning').
There are two ways to install the charger:
2
1 Mount the upper part of the charger on the
wall, close to a socket.
2 Connect the upper part of the charger
to the lower part ('click') and place the
charger on the worktop.