Tips And Advice - Electrolux DF36A Manual De Instrucciones

To prevent odors:
Stores the food always
packed
containers.
Use dried packaging and
containers.
Remove the food from the
freezer before defrosting
operation.
In case of prolonged absence (eg. travel)
intending to turn the refrigerator off, remove
all foods and clean it, leaving the door half
opened to prevent mold and unpleasant
odors (see item cleaning and maintenance).
Do not store food with date-expired in the
refrigerator.
Cooked foods (eg. rice, beans, etc.), high in
fat (eg. dairy, salami, ham, etc.) and acids
(eg. vinegar, wine, onion, garlic, etc.) exhale
odors that can contaminate other foods and
generate unpleasant odors over time of use
of your refrigerator.
To preserve the refrigerator:
Avoid the contact of any type of oil or fat with
the plastic parts of the appliance to avoid
the appearance of spots and damage to the
appliance.
Do not lubricate the door hinge in any way to
not cause damage to the plastic parts.
Do not put glass bottles, plastic or unopened
cans in the freezer because liquids increase
in volume when frozen, so these containers
can break.
In the event of a blackout, do not open the
appliance doors. This will ensure that the
internal temperature is keept for a longer time.
32
Tips and Advices
or in closed
To save energy:
Keep the doors open only as long as
necessary.
If the doors are not properly closed, will
increase energy consumption and may occur
excessive ice formation.
Do not use towels or plastic to line the shelves
and distribute food thoroughly to facilitate the
circulation of cold air between them.
Never hang clothes,
rags or objects in the
condenser (rear of the
refrigerator), because
it affects the operation
and increases energy
consumption.
Do not put hot food in the
refrigerator or freezer.
To carry the refrigerator:
In case you need to
transport, do not throw the
product to the right (for
who looks the refrigerator
from the front).
For small shifts, tilt it
back or to one side with
a maximum angle of 30°.
In long displacements
(eg. move), move
upright.
Do not drag the product
by pulling the condenser.
it