Assembly - Base - GLIDEAWAY Comfort Base Manual De Instrucciones

ASSEMBLY - BASE

It is HIGHLY recommended to use two people for the installation of this product. To
assemble, please perform the following steps:
1
Carefully lift both Base Pieces and remove
the plastic wrapping from the bottom to
access the bases. Remove the cable ties
holding both Base Pieces together. Lay
the two Base Pieces down and unpack the
remaining items.
2
Remove the bolts from the Connecting
Rods and set aside. Insert the Connecting
Rods into one side of each Base Piece
and install two bolts into each of the
Connecting Rods.
3
Slide the other Base Piece over exposed
Connecting Rods. Install remaining bolts.
Be sure to hand tighten each and then
tighten 1/4 turn more, as over-tightening
could cause damage to the frame or
Connecting Rod.
TWIN XL/KING INSTALLATION:
See pages 7 and 8.
QUEEN INSTALLATION:
See pages 9 and 10.
6