Intended Use; Safety Instructions; Original Operating Manual - Festool GD 320 Manual De Instrucciones

Original instruction manual
1 Technical Data
Carpenter Stand
Maximum drill length
Maximum drilling depth
Guiding disk for drills
Maximum drilling dia. without guiding disk
Tilting at an angle
Clamping for drilling machines with clamping neck of the dia.
Weight
Overall height
Base board
Parallel stop - adjustable
- in vertical direction
Accessories, not included in the scope of the delivery
Guiding disk for spiral drills of the dia. 6,7,9,11 ... 27 mm
Clamps (4 pcs) for clamping the stand for material up
to 105 mm (up to 127 mm for GD 460 A)
Brackets (2 pcs) for fastening the clamping elements
stand up to the material width of 300 mm
2 Symbols
Warning of general danger
Read the operating instructions/notes!
Do not throw in the household waste!
Advice or tip

3

Intended use

The drilling stands GD 320 and GD 460 are in-
tended for precise drilling at the precise angle of
90°. By means of the guiding disk, it is possible to
guide the spiral drills from dia. 8 to 26 mm, even-
tually, from dia. 6 to 27 mm, precisely and safely.
Without a guiding disk, the maximum drilling
depth is 45 mm. Two parallel stops server for a
simple placement, or eventually, guiding on the
material. The clamping elements for clamping
the stand can be ordered as accessories. The
stand can be employed with all electric drilling
machines with the clamping neck of the dia. 57 or
43 mm that do not exceed the maximum torque
of 75 Nm.
The drilling stand GD 460 A can be employed for
drilling at an arbitrary angle in the range from
90° to 45°.
GD 320 GD 460
320 mm 460 mm
240 mm 380 mm
dia. 8, 10, 12 ... 26 mm
45 mm
- -
57/43 mm
2,8 kg 3,2 kg
532 mm 672 mm
185 x 172 mm 185 x 172 mm
8 - 190 mm
- -
4

Safety Instructions

WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
- The combination of the hand drilling machine
with the stand creates a piece of equipment for
which the safety and operating instructions for
the drilling machine apply. Therefore, read also
the safety and operating instructions for the
drilling machine.
- During work, it is necessary to hold the equip-
ment with both hands, gripping the respective
handles.
- Before starting work, it is necessary to check
and make sure that the rotating parts of the
machine may not collide with the stable parts
of the drilling stand or with the material during
the drilling operation.
- Before starting work, it is necessary to check
and make sure that all the elements intended
for securing the position, the clamping etc., are
well tightened and secured.
- During the operation, the loose chips, splinters
and similar pieces must not be removed from
the vicinity of the tool by hand.
GD 460 A
460 mm
310 mm
up to 45° steplessly
3,7 kg
672 mm
207 x 172 mm
25-185 mm
Order No
621947
621949
622471
9