Installation Instructions - Bulldog HW Serie Manual De Instrucciones

BefORe InSTaLLIng and uSIng yOuR HydRauLIC WInCH, Read and
fOLLOW aLL MOunTIng InSTRuCTIOnS and SafeTy MeSSageS.
Mounting
WARNING
To prevent accidental activation of the winch and serious injury, complete the winch installation
and attach the hook before installing the hydraulic lines.
1. Before Installation
1.1 Inspect Parts
Hand Saver Cable Strap
Clutch T-Handle
Instruction/Owners Manual
Winch Assembly
Mounting Hardware Requirements
Eight (8) Winch Mounting Bolts and two (2) Fairlead Mounting Bolts, Nuts, and Washers are required. Refer
to Table 4 on page 9 for bolt quantity, sizes, and required torque. Mounting system will dictate bolt length.
WARNING
ALWAYS torque mounting bolts to the values specified for your winch in Table 4 to prevent
vibration during operation.
ALWAYS use a grade 8 class 12.9 metric or better hardware.
NEVER weld mounting bolts.
ALWAYS choose the proper bolt length for your application.
ALWAYS confirm required bolt length to ensure proper thread engagement.
1.2 Select Mount Location
WARNING
ALWAYS choose a mounting location that is sufficiently strong to withstand the maximum
pulling capacity of your winch.
Templates are not to scale.
6
CEQUENT

Installation Instructions

HW8000 & HW12000 DIMENSIONS
PERFORMANCE PRODUCTS, INC. •
™
Roller Fairlead
Mounting Footprint Template
Mounting Hardware
Drum Drag Bolt
F3840-00 REV A (3618) 12/14