Oven Installation; Pizza Ceramic Deck Installation & Conditioning - Waring Commercial WPO500 Manual De Usuario

OVEN INSTALLATION

• After removing the outer shipping carton and packaging
material, place the oven on the floor or other flat surface.
• Open oven and remove any instructions or packaging material
shipped in the unit.
• With sufficient help, lift up the front of the oven and attach the
two front legs (packed separately in styrofoam), carefully twisting
each one into a corner and hand-tightening. Lift the back of the
oven approximately 5 inches and block into position using a piece
of wood or other solid object. Then, attach the two back legs and
hand tighten.
• Move the oven to its final location. Adjust the bottom portion
of the legs to level the unit. (fig. 1)
PIZZA CERAMIC DECK
INSTALLATION & CONDITIONING
Read these instructions carefully before installing or
conditioning the ceramic deck. New deck must be conditioned
(pre-dried) prior to first use.
• Handling the Ceramic Deck: If deck is struck against hard
surface before, during or after installation, it can develop a full
or hairline crack which may expand over time and require you to
replace it.
• Installing the Deck: Open the oven door and place ceramic pizza
deck into the bottom with the slots on front of deck facing front
of oven. Be sure the deck is firmly set in place. Do not force or
wedge it. (fig. 2)
• Conditioning the Deck: Pre-dry ceramic deck by carefully
following instructions in the following section, BEFORE USING
YOUR PIZZA OVEN. NOTE: Failure to follow conditioning
instructions will cause deck to crack or warp and will void
warranty.
8