Connecting The Inputs And Outputs - Heyl Testomat 808 Manual De Instrucciones

!
CAUTION
Terminal
description
RELAIS 3
RELAIS 2
RELAIS 1
EXT.
LÖSCH.
STOPP

Connecting the inputs and outputs

Connecting the inputs

Do not connect external voltage to these connections!
®
Testomat 808 has the following connections for control and monitor-
ing functions.

Ensure that the strands are held securely in the terminals.

Use the two fastening screws to close the door once installation
has been completed.
Type Function
Fault message output – change-
OUT
over contact
OUT Control for external application
OUT Control for external flush valve
Acknowledgment message input –
IN
normally open
Flow controller/Switch input –
IN
normally open
* Please refer to the section entitled
the maximum contact load of the relays.
Installation
Comment
Volt-free relay output*
Volt-free relay output*
Volt-free relay output*
Volt-free input
Volt-free input
"Technical data" on page 46 for
23