Indicators For Testomat ® 808 Instruments; Scope Of Delivery; Performance Specifications - Heyl Testomat 808 Manual De Instrucciones

Scope of delivery

Indicator Monitoring
type range
300 – 350
Residual
ness
0.02 – 5 °dH
10
Scope of delivery
®
1x Testomat 808 2019
1x plastic bag containing 1 screw cap with a hole and an insert for the
screw cap of the indicator bottle (500 ml)
2x fuse
1x operating instructions
Special accessories (available separately): Filter inlet, candle filter as
well as pressure regulator
Required hose connections and supply lines for Testomat
available from Heyl.

Performance specifications

®
Testomat 808 is used for the automatic monitoring of residual total
hardness (water hardness) in water. The limit value to be monitored
is determined by the indicator selection.
•
Limit values for residual hardness of 0.02 – 5.0 °dH determi-
nable by indicator selection
•
Analysis start:
- Automatic interval mode
(Interval pause can be set from 0 – 60 minutes)
- External control
- Manual start
•
Extended operating periods due to 500 ml indicator storage
bottle
•
RS232 interface for optional firmware update
Indicators for Testomat
Indicators with various limit values are available for the application of
®
Testomat 808 instruments according to operational requirements.
Limit value LEDs
(good/poor display)
"GOOD"
hard-
"POOR"
All indicator types are available in two bottle sizes (100 ml and
500 ml). Please refer to the section entitled
accessories" on page 44 for a detailed list of the
spare parts and
individual indicator types with the respective article numbers.
®
808 instruments
(information on water quality)
green Residual hardness < indicator limit
value
red Residual hardness > indicator limit
value
®
808 are
Measuring result
"Testomat
®
808 2019