General Procedure For Setting Up The Meter (Set Mode) - cobas Accutrend Plus Instrucciones De Uso

Meter Setup

General procedure for setting up the meter (set mode)

You make all settings using the Set and M buttons as described below. Please note that the
meter must be powered off before you can activate the set mode.
If you power on the meter without setting the date and time, dashes will appear where the
■
date/time information should be. If no date/time setting is made, no date/time information
can be saved with the test results in memory.
If the meter has lost previously entered date/time settings (e.g., after a prolonged period
■
without batteries), you need to enter date/time settings again.
24
1 Press the Set button (on the left side of
the meter) to power the meter on in set
mode.
2 The date and time as well as the icon set
now appear on the display. To make or
change settings, press the Set button
again.
To leave set mode at any time, press the
On/Off button .