The Accutrend Plus Meter
Power supply
To save power, the Accutrend Plus meter automatically powers off after 2 minutes unless a
button has been pressed or a new test strip has been inserted. When the meter powers off, all
results obtained up to that point remain in memory.
With a set of fresh batteries, you will normally be able to perform at least 1,000 measurements.
When the battery warning is displayed for the first time, approximately 50 measurements can still
be performed. In this case, replace the batteries as soon as possible.
When replacing the batteries you must insert the new batteries within one minute of removing
the old ones, to keep the date and time settings. If you take longer than this, you must re-enter
the date and time. Use only alkali-manganese batteries type AAA.
Results are retained in memory together with the date and time even when no batteries are
inserted. All other settings are retained, too.
Think of the environment. Dispose of used batteries sensibly.
WARNING
18
Exploding batteries
Do not throw used batteries into an open fire. They may explode.