Important Safety Instructions - SEVERIN KS 9770 Instrucciones De Uso

GB
Fridge/freezer combination
Dear Customer,
Before using the appliance, read the following instructions
carefully and keep this manual for future reference. The
appliance must only be used by persons familiar with these
instructions.
Transporting the appliance
∙ To prevent damage to the unit during transport, ensure
that all accessories and components inside and around
the appliance are securely fastened.
∙ The unit must only be transported in its vertical position;
do not tilt any more than 30°. For positioning, we
recommend that you tilt the unit slightly backwards. In
this way, the transport rollers can be used to move it to
its intended place of installation.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
∙ If the unit has been tilted more than 30° during transport,
allow it to stand in an upright position for at least 4 hours
before it is connected to the mains.
Connection to the mains supply
∙ The appliance should only be connected to an earthed
socket installed in accordance with the regulations.
Make sure that the supply voltage corresponds with the
voltage marked on the rating label. The green mains
indicator next to the temperature control shows that the
unit is connected to the mains.
∙ This product complies with all binding CE labelling
directives.
∙ Do not operate this unit by means of a transformer.
∙ To prevent noise vibration, ensure that the power cord
does not touch any part of the rear of the unit.
Intended use
∙ This appliance is a compressor
refrigerator, designed for the short-
term storage of food in the main
cabinet and long-term storage of food
in the freezer compartment.
∙ Using it in any way other than the
above is not advised.
∙ No responsibility is accepted if
damage results from improper use, or
if these instructions are not complied
with.
∙ This appliance is intended for
14
domestic or similar applications, such
as
- in staff kitchens in shops, offi ces and
similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc.
and similar accommodation,
- in bed-and breakfast type
environments.
∙ This appliance is not intended for
commercial use, nor for use in the
catering business or similar wholesale
environments.

Important safety instructions

∙
gas with a high level of environmental
compatibility, which is nevertheless
fl ammable. Ensure, therefore, that
none of the components of the
refrigerant circuit become damaged
during transportation and installation
of the appliance. If damage to the
cooling circuit does occur, do not
switch on or connect the appliance to
the mains power. In the case that
there is an open fi re or any other
sources of ignition in the vicinity of the
refrigerant gas, make sure it is
removed immediately from this area
and that the room is then thoroughly
ventilated.
∙ Warning: Keep ventilation openings,
in the appliance enclosure or in the
The cooling circuit in
this appliance
contains the
refrigerant isobutane
(R600a), a natural