Milling Depth; Systainer; Service And Maintenance - Festool RENOFIX RG 130 E Manual De Instrucciones

5
6
The setting of the milling depth depends on the ma-
terial to be machined.
f Position the adapter [6-1] on the three screws.
f Turn the adapter to set the milling depth (left
f Tighten the nut [6-2].
Many Festool products are shipped in a unique
system container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be interlocked
together. They also can be interlocked atop Festool
CT dust extractors.
– To open the Systainer:
– To lock the Systainer:
– To connect two Systainers:
6-2
f A new generation Systainer is connectable on
6-1
Risk of accident, electric shock
f Always pull the plug out of the socket before
f Always keep the tool and in particular the ven-
16

Milling depth

rotation = higher cutting depth, right rotation =
lower cutting depth).

Systainer

• Turn the T-loc [7-1] to the position
• Turn the T-loc [7-1] to the position
• Place one Systainer on the top of the other
(Fig. 7 A).
• Turn the T-loc [7-1] to the position
(Fig. 7 B).
The Systainers are connected and locked.
top of a previous generation Systainer by the four
latches of the previous Systainer.

Service and maintenance

WARNING
performing any type of work on the machine.
tilation slots clean.
.
.
or