SEVERIN KM-3887 Instrucciones De Uso página 11

●
Whenever the blender jug is not being
used, ensure that the safety lid is
correctly fitted over the blender
mounting.
●
This appliance should only be used with
the attachments provided by the
manufacturer and in accordance with
the purposes described in this manual.
●
Always switch the appliance off, remove
the plug from the wall socket and wait
until the motor has come to a complete
standstill
- before opening the lid
- when adding or removing any
attachments
- in case of any malfunction,
- after use,
- during cleaning.
●
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
●
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
●
This appliance is intended for domestic
use only and not for commercial
applications.
●
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If
repairs are needed, please send the
appliance to one of our customer service
departments. The addresses can be
found in the appendix to this manual.
Operation:
General information
- Remove any packaging materials
completely.
- Before using the unit for the first time,
all attachments and accessory parts
should be cleaned as described in the
section General care and cleaning.
- First, fit the required attachment.
- Note: this kitchen appliance is equipped
with three safety switches. The
appliance can only be activated if the
selected attachment has been correctly
fitted and safely locked.
- Turn off the appliance after use (speed
control position 'O') and wait until the
motor has come to a complete standstill
before changing or removing any
attachments.
A. Chopping/mincing and stirring/mixing
- Place the safety lid on the blender
mounting and lock it by turning anti-
clockwise.
- Attach the
chopping/mincing blade to the drive
shaft in such a way that the blade
assembly almost touches the bottom of
the bowl.
Caution: Hold the blade only by its
plastic shaft - the blades are extremely
sharp.
- Put the ingredients (max. 700g) into the
bowl.
- Place the lid on the bowl and turn it
anti-clockwise to lock; the arrow-mark
on the lid must be aligned with the
corresponding dot on the housing.
- For safety reasons, use the appropriate
pestle at all times when feeding the
ingredients down the food chute.
During operation, the pestle should
remain inserted.
Operation settings
a) Chopping/mincing
Ingredients Speed/switch position
Meat Max and Pulse
Onion 4 – 6 and Pulse
Nuts 9 – Max and Pulse
Carrots 6 – Max and Pulse
Fish 1 – Max and Pulse
b) Stirring/mixing
- The bowl can be filled to a maximum of
1 litre with cold liquid (e.g. soup).
Always start processing at speed level 1
and gradually increase the speed as
necessary.
11
bowl and fit
Duration
10-20 sec.
10-20 sec.
10-20 sec.
10-20 sec.
10-20 sec.
the