SEVERIN KM-3890 Instrucciones De Uso página 12

standstill.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Short-time operation
The appliance has been designed for
short-term operation only, ie it should not
be operated continuously for more than 3
minutes. Switch off the appliance afterwards
and allow the motor to cool down before
switching it on again.
Before using for the fi rst time
Before the appliance is used for the fi rst
time, all attachments and accessory parts
must be cleaned as described in the section
Cleaning and care.
Rotary control
The appliance is equipped with a
continuously adjustable rotary-type control
switch.
The following speed settings may be
selected:
P short-term high speed (pulse)
0 appliance off
1 very low speed
2-3 low speed
4-5 medium speed
6 high speed
Using the main bowl
Caution: When the main bowl is used,
the blender jug must not be fi tted, and its
cover must be in place, as the build-up of
heat will otherwise cause damage to the
appliance.
12
Planetary action
The attachments (whisk, kneading hooks
etc.) are fi tted off-centre, causing them to
rotate round their own axis as well as round
the main drive axis. This action ensures
thorough mixing of the ingredients from the
side of the bowl towards the centre.
Appropriate speed settings
∙ Always start with a low speed setting,
especially when processing liquid or
creamy ingredients, or any mixture
containing fl our.
∙ Setti ngs 1 to 3 are suitable for slow
blending, mixing, stirring in of ingredients
and processing liquid ingredients as well as
making dough.
∙ Setting 4 is suitable for making cake or
pastry dough.
∙ Settings 5 and 6 are suitable for beating
with the whisk.
Whisk
The whisk is suitable for light blending of
liquid mixtures such as sauces, egg-white
and cream.
The whisk can be used with the settings 1-6.
Kneading hook
for medium mixtures
This hook is useful for medium mixtures
such as thick batter-mix and mashed
potatoes, using the speed settings 1-4.
for heavy dough
This hook is suitable for processing heavy
dough using the speed settings 1-3.
Operation
∙ Before fi tting, changing, removing or
cleaning any attachments, ensure that