SEVERIN BA-3299 Instrucciones De Uso página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Steam Generator
Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1.
Flexible connecting hose
2.
Temperature control (adjustable)
3.
Base stand (rear)
4.
Iron
5.
Power cord with plug
6.
Steam generator
7.
Steam jet button
8.
Handle
9.
Swivel-type anti-kink covering
10. Sole plate
11. Release button (in the grip recess)
12. Anti-scale filter
13
Main indicator light - pump
14. On/Off switch with indicator light
15. Steam regulator
16. Rating label (on the steam generator)
17. Removable water reservoir
18. Iron rest (on steam generator)
19. Temperature indicator light – iron
20. Steam button
21. Slide control for extended steam output
Important safety instructions
Before the appliance is used, the main
body including the power cord as well as
any attachment fitted should be checked
thoroughly for any defects or leakage.
Should the appliance, for instance, have
been dropped onto a hard surface, it
must no longer be used: even invisible
damage may have adverse effects on the
operational safety of the appliance.
The power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
strain has been put on the connecting
hose. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a qualified
technician before it is used again.
Always place the appliance on a flat,
level and heat-resistant surface during
operation. Do not position the appliance
on or near hot surfaces or open flames
such as hot-plates or gas flames.
Great care is necessary when using any
appliance, especially near children. Do
not leave the appliance unattended while
connected. Always remove the plug from
the wall socket and place the iron back
on the iron rest on the steam generator.
When ironing is interrupted, the
appliance must be replaced onto the iron
rest on the steam generator.
The iron must be used and stored on a
stable and durable surface only.
With the iron placed on its rest on the
steam generator, ensure that this too is
on a stable and durable surface.
The appliance operates at very high
temperatures. Do not touch any part of
the appliance except the handle. Burns
can occur from touching the hot parts of
the housing or the sole plate and from
hot water or steam. Do not allow steam
to escape in the direction of anyone
nearby.
When operating the appliance, hold only
by the handle.
Do not attempt to iron or to smooth out
wrinkles or creases from clothes by using
the steam jet function while wearing
them.
Do not fill the reservoir with any liquid
other than water.
9
loading