Maytag Neptune FAV-2 Serie Guía De Uso Y Cuidado página 23

T
ROUBLESHOOTING
C
HECK THESE POINTS IF YOUR
Won't Fill
Won't Tumble
Lid Locked Shut;
Will Not Open
Is Noisy
The Touchscreen
is Fading
Freshening
Your Washer
P -U W
OP P INDOWS
In an effort to better understand what is occurring with your Maytag Neptune
appear. These windows are there to inform you of what is happening and what actions may need to be taken. Examples
of these pop-up windows are below.
est. time: main wash
your cycle lid unlocked
OPTIONS
The cycle is complete. The load
cotton
may now be removed.
max extract spin
fabrics
end chime medium
Auto Temp ON
hot wash
cold rinse
ok
stain treat
24 min. wash
save as a favorite
After you have read the message, touch "ok" and the pop up window will disappear.
For further assistance, call Maytag Customer Assistance toll-free at 1-800-688-9900 USA or 1-800-688-2002 Canada.
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
M
AYTAG
• Be sure the lid is closed.
• Plug cord into a live electrical outlet.
• Check fuse or reset circuit breaker.
• Open and close the lid, then push the Start/Pause touchpad.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Check fuse or reset circuit breaker.
• Open and close the lid, then press the Start/Pause touchpad. For your safety, the clothes washer
will not tumble or spin unless the lid is closed.
• Some cycles are designed to tumble then pause. This is normal.
• Press the Start/Pause touchpad to stop the washer.
• It may take up to 2 minutes for the lid lock mechanism to disengage.
• A locked lid may not unlock during a power outage.
• Clothes washer should be leveled properly as outlined in installation instructions.
• Check that the leveling leg lock nuts are tightened.
• Be sure rubber feet are installed on leveling legs.
• Weak floors can cause vibration and walking.
• The load may be unbalanced.
• For information on normal operating sounds, see page 23.
• The contrast may need to be adjusted. Select the Help option pad then "select preferences".
Touch "change monitor contrast". Using the arrows move the block to the left or right to
improve the visual quality of the touchscreen.
• See Cleaning the Interior, page 19.
Press "Start/Pause" or
change selections below.
Excess suds were detected
cotton
during recent cycles. Try using
max extract spin
fabrics
low sudsing or less detergent.
end chime medium
See the help section on User's
Auto Temp ON
Guide for more information.
hot wash
cold rinse
ok
stain treat
24 min. wash
save as a favorite
N ® T -L
EPTUNE OP OAD CLOTHES WASHER
40
est. time:
your cycle
OPTIONS
The washer is checking the lid
cotton
lock system and will unlock
fabrics
shortly. This is normal.
hot wash
cold rinse
stain treat
24 min. wash
22
Top-Load Washer, pop-up windows may
®
main wash
lid locked
A power failure occured during
OPTIONS
the current cycle. Press
max extract spin cycle
"Start/Pause" to continue this
end chime medium
library cycle.
Auto Temp ON
stain
ok
brain
save as a favorite
...
Home
favorite
cycles
set your
ok
own cycle