cecotec ENERGYSILENCE 8150 SKYLINE Manual De Instrucciones página 41

Box content
- Tower fan
- Remote control
- Instruction manual
- 1 CR2025 battery
3. OPERATION
Assembly instructions
Base assembly
1. Loosen the lock nut at the bottom of the fan by turning it counterclockwise. Lower the
power cable as shown in figure 4.
2. Pass the power cable through the central gap between the two halves of the base (not
assembled yet), as shown in figure 5.
3. Join the two halves by pressing the plastic tabs of each half into the corresponding slots of
the other half, like shown in figures 6, 7 and 8.
4. Retighten the locking nut clockwise, as shown in figure 9.
NOTE: make sure the power cable goes through the guides on the base.
Operation
1. Power icon
When pressed for the first time, the fan will switch on. If you press it again, it will switch off.
2. Mode icon
Press this icon to select Normal, Natural or Night mode.
3. Oscillation icon
Press once to activate the oscillation function. If you press it again, this function will be
deactivated.
4. Timer icon
Press this icon to set the timer. You can programme the fan to switch off after 1, 2, 3 or 12 hours
of operation.
5. Speed icon
Press this icon to select the speed (low, medium, or high).
The temperature, mode, oscillation, and speed icons will be shown in the digital display.
ENGLISH
ENERGYSILENCE 8150 SKYLINE 41