Idiomas disponibles
Idiomas disponibles
Function and Setting
• Display Screen lnitialization: Connecting with electricity, the buzzer rings and the display screen lights up for 2 seconds, being into
normal operation mode.
• Power On/Off: Connect with 12/24V power, press the button "
• Temperature Setting: Press the button " " or " " until the figure on the screen begins flashing, then you can adjust the tempera-
ture by " " or " ". The temperature setting range is 0~8ºC
finished and the current temperature will be saved.
• Cooling Mode Control: Press the button "
ECO.
Fast cooling mode
Economical mode
• Battery Protection Mode: Press the button " " over 3 seconds, the LCD will flashes,
then you can select L (Low), M (Medium), H
is powered by car battery, it is recommended to set H mode. When the fridge is powered by build-in battery or portable battery, it is
advised to set M or L protection mode. The reason is that various cars have different output voltage.
lf battery protection occurs, the protection mode should be adjusted from H to M or L. When the engine is switched off, the fridge is
still able to work. Protection mode should be set to H to prevent car battery from exhaustion.
LOW
MEDIUM
• Temperature Unit Setting: press " " switching off the fridge, then press " " over 3 seconds until E1 shows on the screen. Press " "
from E1, E2 switching to E5. When the screen flashes, press " " or " " to change the unit between Centigrade (ºC) and Fahrenheit (º F).
Centigrade
Fahrenheit
• Reset: Power off the fridge, holding the setting button " " until El is displayed on the screen. Hold the button " " and " " until the
screen lights up as follow:
Cleaning and Storage
Cleaning:
1.
Please unplug the fridge first to avoid electric shock.
2.
Do not soak the fridge in water and do not wash it.
3.
Use wet cloth to clean the fridge and dry it.
lf you do not use the refrigerator for a long time, please follow the instruction:
1.
Turn offthe power and remove the plug.
2.
Remove the items stored in the refrigerator.
3.
Absorb ali the water in fridge with dry cloth.
4.
Place the fridge in a cool and dry place.
(32~42º
(Note: the displayed temperature is the temperature of freezer.)
" to select cooling mode. You can switch mode between MAX (Quick cooling mode) and
(High)
mode for your battery protection. The default setting is H mode. When the fridge
HIGH
Part installation
Part 1 is fixed on the fridge. In order to fix the fridge on the wall, we need to drill a hole on Part
1 and screw the bolt through Part 1 and fix it on the wall, using Part 2 to cover the hole. A bolt,
which screw thread is below MS and length is over 15mm, is needed.
please contact the supplier before your purchase. Bolt is not provided. Customers need to prepare for it).
" to turn the unit on/off.
F). lf you stop holding the button for 4 seconds, the setting will be
(lf you need a drilled fridge,
