Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
1. If your power tool does not start, check the plug on the power
supply first.
2. If your hammer becomes too hot in use, set the hammer switch
to the drill mode and allow your drill to operate at maximum
speed without load for 2 minutes.
3. If your hammer work efficiency is too low, please add sufficient
grease in the grease box.
4. If your hammer use in low efficiency, please check whether the
tool is blunt.
5. If a fault can not be rectified, return the tool to an authorized
dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling
advice.
PLUG REPLACEMENT (ONLY FOR
REWIRABLE PLUG OF UK & IRELAND)
If you need to replace the fitted plug then follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in accordance with the
following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of this appliance may not
correspond with the colored markings identifying the terminals in
your plug, proceed as follows. The wire which is colored blue must be
connected to the terminal which is marked with N. The wire which is
colored brown must be connected to the terminal which is marked
with L.
Warning!
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved BS1363/A plug and the correct rated fuse.
Note: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
clamped
DECLARATION OF CONFORMITY
We,
POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne, German
Declare that the product,
Description Rotary hammer
WS3202K WS3202K.1 (32 - designation of machinery,
Type
representative of rotary hammer)
Function Hammering various materials
EN
Fuse
Brown L(live)
Cable grip
Complies with the following Directives,
2006/42/EC, 2014/30/EU, 2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1, EN IEC 62841-2-6, EN IEC 55014-1, EN IEC 55014-2,
EN IEC 61000-3-2, EN 61000-3-3
The person authorized to compile the technical file,
Name
Marcel Filz
Address POSITEC Germany GmbH Postfach 32 02 16, 50796
Cologne, Germany
2023/2/22
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
DECLARATION OF CONFORMITY(UK)
We,
Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
On behalf of Positec declare that the product
Description Rotary hammer
Type
WS3202K WS3202K.1 (32 - designation of machinery,
representative of rotary hammer)
Function Hammering various materials
Complies with the following regulations:
Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations
Standards conform to
BS EN 62841-1, BS EN IEC 62841-2-6, BS EN IEC 55014-1, BS EN
IEC 55014-2, BS EN IEC 61000-3-2, BS EN 61000-3-3
The person authorized to compile the technical file,
Name
Jim Kirkwood
Address
Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
2023/2/22
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
9
