Idiomas disponibles
Idiomas disponibles
Oven Glass Cleaning
Lift by pressing the plastic latches on the left and right, as shown in
figure 10 and pulling the profile towards you, as in figure 11.
The glass is released after the profile is removed, as shown in figure 12.
Extract the loose glass by carefully pulling it towards you.
The outer glass is attached to the oven door profile. You can
reassemble the windows by performing reverse operations after
cleaning and maintenance are complete. Make sure that the profile is
correctly seated in place.
Catalytic Walls
The catalytic walls are located to the left and right of the cavity
under the guides. Catalytic walls eradicate stench and obtain the best
performance from the stove. The catalytic walls also absorb oil residues
and clean your stove while it is running.
Remove catalytic walls
To remove the catalytic walls, the guides must be pulled out. As
soon as the guides are pulled out, the catalytic walls are released
automatically. The catalytic walls have to be changed after 2-3 years.
Rack Positions
It is important to place the wire grill into the oven properly. Do not
allow wire rack to touch rear wall of the oven. Rack positions are shown
in the next figure. You may place a deep tray or a standard tray in the
lower and upper wire racks.
34
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 34
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 34
Rack 4
Rack 3
Rack 2
Rack 1
06/05/2020 14:21
06/05/2020 14:21
