Jocel JLLI023124 Manual De Instrucciones página 95

Idiomas disponibles

Idiomas disponibles

CLEANING THE DOOR
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on the surface.
Follow these steps when there is foreign material in the dishwasher.
WARNING!
Never use a spray cleaner to clean the door panel for it could damage the door lock and
electrical components. It is not allowed to use the abrasive agent or some paper towel
because of the risk of scratching or leaving spots on the stainless-steel surface.
HOW TO KEEP YOUR DISHWASHER IN SHAPE
AFTER EVERY WASH
After every wash, turn off the water supply to the appliance and leave the door slightly ajar
so that moisture and odors are not trapped inside.
REMOVE THE PLUG
Before cleaning or performing maintenance, always remove the plug from the socket. Do
not run risks.
NO SOLVENTS OR ABRASIVE CLEANING
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive
cleaning products. Use only a cloth and warm soapy water. To remove spots or stains from
the surface of the interior, use a cloth dampened with water and a little white vinegar, or a
cleaning product made specifically for dishwashers.
WHEN YOU GO ON HOLIDAY
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher
empty and then remove the plug from the socket, turn off the water supply and leave the
door of the appliance slightly ajar. This will help the seals last longer and prevent odors from
forming in the appliance.
MOVING THE APPLIANCE
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary,
it can be positioned on its back.
SEALS
One of the factors that cause odors to form in the dishwasher is food that remains trapped
in the seals. Periodic cleaning with a damp sponge will prevent this.
95
loading