1. Pull the mains plug from the socket.
2. Loosen the bu� on fi xing the water pump (as below pic. Show), take out the water tank,
and pour out the water.
3. Once the tank has been completely emp� ed,
Reinstall the clips at 2 ends of the water pump
(as shown by the arrow in the fi gure) and
checked it's installed fi rmly.
CLEANING THE HOUSING
Before cleaning the appliance, switch it off , then wait a few minutes, and then unplug it
to disconnect the appliance from the mains power supply.
• Clean the housing of the appliance with a slightly damp cloth and then dry with a dry
cloth.
• Never wash the appliance with water. It could be dangerous.
• Never use benzene, alcohol or solvents to clean the appliance – this could be dangerous.
• Do not spray insec� cides or similar agents on to the air cooler.