Idiomas disponibles
Idiomas disponibles
C. Sleep wind: When the sleep wind mode is selected, the fan motor enters into
the sleep wind computer program control, and the fan air volume gradually
decreases to prevent people from catching cold a� er sleeping. When it is set to:
- Strong wind, the fan will run for half an hour according to strong natural wind,
then turn to middle natural wind, and then turn to low natural wind a� er half an
hour, un� l the preset � me is over or turned off .
- Medium wind, the fan will operate at the middle natural wind for half an hour,
and then turn to the Low natural wind un� l the preset � me is over, or it is turned
off .
- Low wind, the fan operates according to the Low natural wind un� l the preset
� me ends or is turned off .
5. Press the "
pump will working. Before you touch bu� on please ensure that the water tank is
fi lled with water. In the cool mode, the appliance pumps water from the water tank
to generate mist to humidify the air and improve the cooling eff ect. To exit the cool
to generate mist to humidify the air and improve the cooling eff ect. To exit the cool
mode, press the
mode, press the
6. Press the "
right to adjust the direc� on of the air fl ow. The corresponding indicator
the display panel will be shown.
7. The appliance can be programmed to automa� cally turn off in 1 or 12 hours.
To use the � mer, Press the "
(1H-2H-...-12H-0H). The corresponding hours indicators light up. When your
desired number of hours appears, stop pressing the bu� on. The � mer will start
immediately.
immediately.
8. Press the "
shut off . Press the bu� on again, and all the indicator lights will turn on.
9. If the appliance is turned off when the "cool" func� on is running, the machine will
run at high wind speed for 5 minutes, and will shut down automa� cally a� er the
wet curtain is dried.
ADDING WATER
• Before using the cool mode, you must add water to the water tank of the
appliance. You may also add ice boxes to the water tank to improve the cooling
eff ect. Make sure the appliance is not connected to an electrical socket.
" bu� on, the cool mode indicator(
bu� on again. The cool mode indicator will turn off .
" bu� on, the oscilla� on func� on moves the defl ectors le� and
programmed to automa� cally turn off
" bu� on, all the indicator lights included room temperature will
" bu� on to cycle through the numbers of hours
) lights up and the water
moves the defl ectors le� and
on
