cecotec CONGA ASH 2000 HOME Manual De Instrucciones página 8

Aspirador de cenizas
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
- Do not use the product to vacuum liquids, nor burning
objects. Do not vacuum sharp objects, toner dust, or plaster.
- Wait until the ash has cooled down to at least 40 °C before
vacuuming it.
- Do not try to exceed the capacity of the tank. Stop using the
appliance once the dust tank is full and empty it accordingly.
- Do not put any objects into the openings of the appliance.
Do not use the appliance if its openings are blocked. Do not
restrict the airflow through the appliance. Keep all openings
free of dust, lint, hair, and anything that may reduce the
airflow.
- If the suction openings of the unit or the flexible tube are
blocked, switch off the vacuum cleaner and remove the
blocking substance before starting the unit again.
- Do not use the appliance if the accessories or parts are not
properly installed.
- Do not use the appliance if the accessories or parts are not
properly fastened.
- Do not use any accessory that has not been recommended
by Cecotec, as they might cause injuries or damage.
- Keep hair, loose clothing, fingers, and other parts of the body
away from the openings and moving parts of the device.
- Never leave the device unattended during use. Unplug the
device after use and when you leave the room where it is
installed.
- Do not try to repair the appliance by yourself. Contact the
official Cecotec Technical Support Service for advice.
- Cleaning and maintenance must be carried out according to
this instruction manual to make sure the appliance works
properly. Turn off and unplug the appliance before cleaning it.
- Cleaning and maintenance tasks must not be carried out by
children.
8
CONGA ASH 2000 / 3000 / 4000 HOME
loading