Idiomas disponibles
Idiomas disponibles
9. Troubleshooting Guide
If the display shows an error code. please refer to this sheet for a potential solution.
Cooktop does not work
Cooktop does not heat
Cooktop turns off while
cooking
The fans keep running for
one minute after the unit has
been switched off
• Cooktop controls are locked
• Power outage
• No cookware or improper
cookware placement on the
cooking element
• Incorrect cookware size for
the selected cooking element
• Cookware is not properly
resting on cooking element
• Incorrect cooking element
selected
•No power to cooktop
• Cooktop internal heat
sensor has detected high
temperature inside the
cooktop，activating
automatic shut off
•Liquid or object on the
controls area
The electronics are cooling
down
16
• Make sure Lock mode is
turned off
• Check house lights to confirm
power outage
• Contact manufacturer
• Make sure that the
cookware is centered on the
cooking element. and that
cookware is also of correct
type for induction cooking.
See Compatible Cookware
• The bottom of the cookware
must be large enough to
cover Cooking Element
• Cookware bottoms must be
flat and centered on the
Cooking Element
• Make sure the correct
control is ON for the Cooking
Element being used
• See "Cooktop does not
work" above
• Make sure the cooktop vents
are not blocked
• The cooktop features an
automatic shutoff feature that
turns off the entire cooktop if
any Cooking Element has been
on continuously for 2 hours
• The cooktop control panel
may register liquids or objects
obstructing the panel. which
can cause the cooktop to shut
off. Clean up spills or remove
objects and restart the unit
This is a normal occurrence
