Idiomas disponibles
Idiomas disponibles
7. Set Timer Mode:
The automatic Timer settings range from 1 minute to 4 hours and 59 minutes.
A short "+" or "-" key press adjusts the time by 1 minute and a long "+" or "-" key press by 10
minutes.
Note: there is no "seconds" display, only hours and minutes. When the cooking is Paused, the Timer
is also Paused.
When the cooking element is in the Power or Melt or Keep Warm or Simmer cooking mode, press the
"Timer" key until time symbol light of the desired cooking element is ON, digital display shows "0:00"
and flashing; Press "+" or "-" key to set the desired number. Once the Timer is set and no "+" or "-"
key are pressed for 5 seconds, the Timer begins the countdown and the Timer display will stop
flashing and will stay on in the display. Once the Timer number reaches "0:00", the cooktop will
sound "beep", indicating that the time is up, the specific cooking element will shut off automatically.
If you want to set another burner to switch-off automatically, press "Timer" key to until the desired
Time symbol light flashes, repeat the same steps above.
If you want to check the remaining time for the other element, press the "Timer" key until the time
symbol light for the desired cooking element flashes.
If more than one switch-off time is programmed, the shortest time remaining will show in the display,
the indicator for that particular burner will flash.
To Cancel Timer:
1. Press the "Timer" key, then repeat the operation above until the digital display reads 0:00, The
Timer display will flash for 5 seconds and then turn off, indicating that the Timer has been canceled.
2. Or Press Timer key for 3 seconds to turn off all the Timer settings.
8.Bridge-SYNC
SYNC function (A big zone)
Place the pan on the cooktop over the two cooking elements, covering both cooking zones turn on.
1.When the cooktop is in the Readiness Mode, or other cooking mode.
2.To activate the two cooking elements as a single big zone, simply press Bridge "SYNC" key.
3.The cooking setting of two cooking elements are the same, press "+" or "-" to adjust the desired
power level or press "Melt" or "Keep Warm" or "Simmer" to enter into preset cooking function.
Note: There are 9 Power setting levels in the Bridge-SYNC Mode.
Note: If no pan is detected on either cooking element, the no pan cooking element will show " ".
If no pan is detected for 30 seconds:
1.The Bridge-SYNC function will switch off, Bridge-SYNC light will disappear.
2.The cooking element without a detectable pan will turn off.
3.The remaining cooking element will continue cooking at the selected cooking setting.
Cancel Bridge-SYNC (Two independent element)
To use the flexible area as two different elements with different settings,
1.Press the Bridge "SYNC" key again, Bridge-SYNC function will switch off, a big cooking area will return
to two independent elements, bridge cooking element will turn off.
2.Press On/Off key of cooking element, the selected cooking element will turn off, the other cooking
element will continue cooking at the existing cooking setting.
Important: In case of big pot, oval, rectangular and elongated pans make sure to place te pans centered
on the single cooking element covering both cross as below:
8
