Idiomas disponibles
Idiomas disponibles
4
Part names and functions
■
Remote controller
Max. 8 indoor units can be operated by a remote controller as a group.
●
Illustration of LCD shown below is for explanation. It may differ from the actual LCD.
●
1
13
2
3
SWING
7
FIX
9
COMFORT
SLEEP
14
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2
START/STOP button
Press the button to start operation.
(A receiving beep is heard.)
Press the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor
unit, press the button twice.
3
Mode select button (MODE)
Press this button to select a mode.
Each time you press the button, a mode is selected
in a sequence that goes from A : Auto changeover
control,
: Cool,
: Dry,
and back to A.(A receiving beep is heard.)
4
Temperature button (
....... The set temperature is increased up to
86°F (30°C).
....... The set temperature is dropped down to
62°F (17°C). (A receiving beep is heard.)
5
Fan speed button (FAN)
Press this button to select fan speed.
When you select AUTO, the fan speed is
automatically adjusted according to the room
temperature.
You can also manually select the desired fan
speed from among five settings.
(LOW
, LOW
, MED
+
MED
, HIGH
+
(A receiving beep is heard.)
4
6
5
FAN
15
QUIET
12
Hi POWER
11
8
10
: Heat,
: Fan only,
)
,
)
– 4 –
6
Auto louver button (SWING)
Press this button to swing the louver.
(A receiving beep is heard.)
Press the SWING button to stop the louver
swinging.
(A receiving beep is heard.)
7
Set louver button (FIX)
Press this button to adjust the airflow direction.
(A receiving beep is heard.) While this button is
kept depressed, the receiving tone continuously
sounds.
8
Off timer button (OFF)
Press this button to set the OFF timer.
9
On timer button (ON)
Press this button to set the ON timer.
10
Reserve button (SET)
Press this button to reserve time settings.
(A receiving beep is heard.)
11
Cancel button (CLR)
Press this button to cancel ON timer and OFF timer.
(A receiving beep is heard.)
12
High power button (Hi POWER)
Press this button to start the high power operation.
Only available during Auto changeover control or
Cool operation.
This function is not operated group control.
13
PRESET button
Press this button to change the operation mode
to the preferred operation mode memorized
previously. To memorize the operation mode,
press this buttion for at least 3 seconds during
the preferred operation mode.
the operation mode is memorized.
14
COMFORT SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations (1, 3, 5 or 9 hours).
During group control operation, the set temperature
and the fan speed are not automatically adjusted.
Only off timer function is activated.
15
QUIET button
Press this button to start quiet operation.
Pressing this button again will restore normal
operation.
is displayed and
EN
4-EN
